Unveiling the Mystery Xentry Diagnosis Multiplexer Initialization Success

I had issues with my C3 connecting to my car, I realized the laptop settings were incorrect. Once I changed the COM port settings I was now ... How to solve SD Connect C4 Initialization of Diagnosis Multiplexer Failed ... Free Download V2024.10 MB Star Diagnostic SD Connect C4 XENTRY ... If the IP is right, but you met the fault “ Initialization of Diagnosis Multiplexer Failed ” when you diagnose, and the diagnosis disconnect and ... All other software of vxdiag full works fine, when connects with Benz with Xentry software, it gave error “Initialization of diagnosis multiplexer failed” , ... V2015.9 up MB Star C3 Mux Initialization Failed Solution Here is the solution to MB Star C3 V2015.9 up DAS Xentry multiplexer initialization ... ... diagnosis", "diagnostic", "diagnostics", "diagonal", "diagonally ... failed", "failing", "fails", "failure", "failures", "faint", "fair", "fair-skinned ... Initialization of diagnosis multiplexer failed. Possible causes: The link between the diagnosis multiplexer and the diagnostic unit is ... Initialization of diagnosis multiplexer failed. Possible causes: The link between the diagnosis multiplexer and the diagnostic socket is ... It connects to the mux OK, Xentry starts OK, Xentry simulation works OK, but when connected to a car all I got is common error message : Fault (1.2)- 2.503. ... 9901: Initialization of diagnosis multiplexer failed. xentry-2018-9. use a good lan cable 2. set lan tcp/ip to: ip address: 172.29.127.119