This guide provides a comprehensive walkthrough for configuring your VAS5054A interface to function as a PassThru device with XENTRY Diagnostics on a Windows 10 64-bit system. This setup enables compatibility with newer Mercedes models, including Euro5/6 compliant vehicles like the W205, W213, and W222. While VAS5054A traditionally doesn’t support 64-bit PassThru functionality, this method utilizes a modified driver to achieve compatibility.
Disclaimer: This method involves using a modified driver. Proceed with caution and at your own risk. This is intended for testing and educational purposes only.
Prerequisites for VAS5054 XENTRY PassThru
Before you begin, gather the following:
- VAS5054A Hardware: A genuine or high-quality clone VAS5054A Bluetooth interface.
- (Optional) EDIC_PDU_API Driver: Version 1.20.4x is recommended. This driver facilitates the installation of necessary .NET framework and VC++ redistributable files.
- (Optional) Firmware Update: Version 1.20.41 is recommended for enhanced compatibility.
- Modified PassThru Driver: Softing_VAS5054A_PassThru_Driver_x64_v3.zip (download link provided below).
- Operating System: Windows 10 64-bit.
- (Optional) Power Adapter: A 12V DC power adapter and jumper wires for powering the VAS5054A independently.
Installation Steps for VAS5054 XENTRY on Windows 10
Pre-Installation:
- Install XENTRY PassThru software and apply all necessary patches.
- (Optional) Install the EDIC_PDU_API 1.20.42 (or 1.20.41) driver. This step is crucial for setting up the required .NET framework and VC++ dependencies. If performing a clean Windows installation, install this driver first to ensure proper framework setup.
Installation:
- Copy the contents of “Program Files (x86)Softing*” to “C:Program Files (x86)Softing*”.
- Copy the “Program DataD-PDU API” folder to “C:Program DataD-PDU API”.
- Double-click and run “Softing_VAS5054A_PassThru_1_20_042.reg” to merge the registry entries.
- Create a desktop shortcut for “SftngCM.exe”.
- Right-click “C:Program Files (x86)SoftingEdicDriverwin7softingedic7_ntamd64.inf” and select “Install” to install the device driver.
- Connect the VAS5054A to your computer via USB. Power the device using a 12V DC adapter or connect it to the vehicle’s OBD-II port.
- Verify driver installation in Device Manager under “Softing…”. If necessary, manually update the driver.
- Create a desktop shortcut for “EDICConfig.exe”.
- (Optional) If using genuine hardware and a newer EDIC_PDU_API driver version, install the API driver now.
Post-Installation Testing:
- Connect the VAS5054A to a power source or the OBD-II port.
- Run “SftngCM.exe” as administrator. Ensure a “C:Temp” directory exists for log files.
- Select “VAS5054A” and enter the serial number (e.g., 0821xxxxx).
- Click “Test” then “Start Test”. The indicator dot signifies the connection status:
- Red: Communication failure. Review driver installation.
- Yellow: PC to VAS5054A communication established.
- Green: PC to VAS5054A to vehicle communication established.
Troubleshooting and Additional Tips for VAS5054A and XENTRY
- .NET Framework: Ensure .NET Framework 2.0/3.0/3.5 is installed. Enable it through “Control Panel/Programs and Features/Turn Windows features on or off/.NET Framework 3.5”. Install VC++ redistributables if needed.
- Temporary Power: For testing, connect ground to pin 4 or 5 and 12V DC to pin 16 of the VAS5054A.
- Driver Updates: Update the EDICDriver in “Program Files (x86)SoftingEDICDriver” if a newer version is available. Update the device driver in Control Panel.
- Registry Edits: For newer EDIC_PDU_API drivers, modify the .reg file, replacing “1_20_42” with the correct version number. Re-import the modified .reg file. Adjust the serial number in the *.reg file if necessary.
[
Setting up VAS5054A on Windows 10]
Download the Modified Driver: https://mega.nz/#!kfYHwahA!xws-PzV8xZaPhwgZ1bwOxr4vLpMVBIvr4SceQGclvgw
