Engine Optimization Disable Secondary Air Injection in W203 with Xentry

Here is what cured my problems. First-checked that air pump came on when car was started. You can hear it turn on. If it turns on then the relay is also good. You will find all the videos I made about this car in this playlist ... Has anyone figured out the perimeter name to disable the secondary air injection via vediamo or das developer? Vehicle is a 2005 C230k I disconnected the power source to my secondary air pump as well as took at that fuse on my Mercedes Benz 2006 ML350. I was told by someone that it is indeed possible to disable the entire system, thus preventing the electric pump motor from turning on. You can turn off the Air Pump, EGR System and Rear Oxygen Sensors if you want to. The codes can be changed using DAS/Xentry. I need to make room on the drivers side for brake ducting so the secondary air pump has to go. Looks like I can just pull everything out, plug ... Is there a way to disable alarm via Xentry so it won't be giving the error? I had to disconnect the battery to shut it off. Has anyone else had the same problem? Car is a 1997 E320. TIA, Steve. 86560SEL ... The secondary air pump motor is only activated when the engine is relatively cold — below 60 deg. F. It is only commanded on for up to two and a half minutes.