Empowering Diagnostics Fixing Xentry Initialization Failures for Diagnosis Multiplexer

I'm having a problem linking my C3 multiplexer to any of my Mercedes cars. I'm getting the standard "Initialisation of diagnosis multiplexer ... I installed DAS 09/2010 on my VMware Workstation I have problem with initialization of diagnosis multiplexer failed CAESAR Self Diagnosis. It seems one requires a dealership level diagnostic software tool (I think DAS or Xentry), to talk to the ECU, which in turn requires a multiplexer, such as ... If you had “00” icon and “Initialization of diagnosis multiplexer failed” problem when using the MB SD Connect C4 multiplexer, you need a sd c4 firmware update. If the IP is right, but you met the fault “ Initialization of Diagnosis Multiplexer Failed ” when you diagnose, and the diagnosis disconnect and ... My XENTRY Kit 4 failed an update today and is now inoperative. Have tried the update center reset multiple times with the same result (attached) Anyone run ... 9901 Initialization of Diagnosis Multiplexer Failed during Mercedes Star Diagnostic SD Connect C4 with 07/2018 Xentry/DAS software diagnosis ... Initialization of diagnosis multiplexer failed. Possible causes: The link between the diagnosis multiplexer and the diagnostic unit is ... The link between the diagnosis multiplexer and the diagnostic unit is interrupted. The voltage supply at the diagnostic socket (circuit 30 and ( ... 9901: Initialization of diagnosis multiplexer failed. xentry-2018-9. use a good lan cable 2. set lan tcp/ip to: ip address: 172.29.127.119