Mercedes-Benz diagnostic software, DAS Xentry, is essential for in-depth vehicle analysis and troubleshooting. While finding a Das Xentry 2014 Download can be challenging, this guide provides a comprehensive installation walkthrough for a successful setup.
Preparing for DAS Xentry Installation
Before you begin the DAS Xentry 2014 installation process, meticulous preparation is crucial. This includes configuring your system and partitioning your hard drive correctly.
System Requirements and User Accounts
Begin by installing Windows XP with Service Pack 3. Create two user accounts with administrator privileges: “OWNER” and “STAR”. These accounts will be used during the installation and operation of the software.
Hard Drive Partitioning
Proper hard drive partitioning is vital for optimal performance. Use a partitioning tool like EASUS Partition Master Free or MiniTool Partition Wizard Home Edition to configure your drives as follows:
- C: Minimum 15 GB free space (20 GB recommended)
- D: Minimum 5 GB free space
- E: Minimum 5 GB free space (20 GB recommended if installing WIS later)
- F: Minimum 20 GB free space
Ensure the drive letters precisely match these recommendations.
System Date and Preparation Batch File
Set your system date to be no more than one month after the STAR DVD release date. This step is crucial for compatibility. Locate and run the prepare.bat file, following the on-screen instructions carefully. This batch file will configure your system for the DAS Xentry installation.
Installing DAS Xentry from the STAR DVD
With the preparatory steps completed, you can now proceed with the core installation process.
Launching the Setup File
Insert the STAR DVD into your laptop’s DVD drive. Assuming your DVD drive letter is “G”, navigate to G:\stardiag\ and run the setup.exe file. The installation might finish quickly and prompt a reboot. Allow the reboot and relaunch the setup.exe file after the system restarts.
Handling Installation Errors
During the installation, you might encounter error -6003. If this occurs, simply click “OK” to continue. This error typically does not impede the installation process. If you need to reinstall DAS Xentry in a different language, do so before proceeding to the next steps.
Post-Installation Steps
After the DAS Xentry installation completes, do not click the “Finish” button to reboot. Instead, locate and run the after installation.bat file included in the installation directory. This batch file will apply necessary configurations.
Configuring COM Port Settings
Properly configuring the COM port is essential for communication between the diagnostic software and the vehicle.
Accessing COM Port Properties
Navigate to: Control Panel > System > Hardware > Device Manager > Ports (COM & LPT). Right-click on the enabled COM port and select “Properties”.
Adjusting Port Settings
In the “Port Settings” tab, configure the following parameters:
- Bits per second: 115200
- Data bits: 8
- Parity: None
- Stop bits: 1
- Flow Control: None
Click the “Advanced…” button and ensure “Use FIFO buffers” is checked and the “COM Port Number” is set to COM2. Click “OK” to save the changes and close Device Manager.
Finalizing the Installation
Reboot your computer to apply the COM port configuration changes.
Troubleshooting User Account Issues
If the STAR user account is locked, try the password: User$star2004. If this fails, log in with the OWNER account and remove the password for the STAR user. You might need to apply additional DAS fixes located in the “DAS fixes” folder provided with the software.
Remember to consult online resources and forums for further assistance and troubleshooting. This guide provides a foundation for a successful DAS Xentry 2014 installation.
